WTB 1916 and 1816 Aluminiums
Moderator: Moderators
-
- Posts: 787
- Joined: Thu Jan 10, 2013 11:19 am
- Location: Sydney NSW
WTB 1916 and 1816 Aluminiums
Hi guys looking to buy 1916 and 1816 aluminiums.
Cheers
Ian
Cheers
Ian
Re: WTB 1916 and 1816 Aluminiums
I think I have a few of them that are made up , what length do you need them to be.
Matt
Matt
-
- Posts: 787
- Joined: Thu Jan 10, 2013 11:19 am
- Location: Sydney NSW
Re: WTB 1916 and 1816 Aluminiums
Hi mate 30" bare shafts
Cheers
Cheers
Re: WTB 1916 and 1816 Aluminiums
Sorry,got nothing that long.
Matt
Matt
-
- Posts: 69
- Joined: Tue Sep 27, 2011 6:57 pm
Re: WTB 1916 and 1816 Aluminiums
Ian I have 15 x Platinum 1816s with uni-nocks
Was keeping them in case I ended up with a 35lber
Shaftcaster---
Was keeping them in case I ended up with a 35lber
Shaftcaster---
-
- Posts: 787
- Joined: Thu Jan 10, 2013 11:19 am
- Location: Sydney NSW
Re: WTB 1916 and 1816 Aluminiums
Hi Ang i sent you a PM.
Cheers
Cheers
-
- Posts: 2040
- Joined: Thu Jul 12, 2007 5:42 pm
Re: WTB 1916 and 1816 Aluminiums
Ian, you missed a great shoot at PCA on the weekend. Then again I missed a great shoot at Hunter Valley. Decisions, decisions.
Kevin
Kevin
never complain....you did not have to wake up....every day is an extra bonus and costs nothing.
-
- Posts: 787
- Joined: Thu Jan 10, 2013 11:19 am
- Location: Sydney NSW
Re: WTB 1916 and 1816 Aluminiums
Hi Kevin,
At least you only missed one i missed bothe!
Cheers
Ian
At least you only missed one i missed bothe!
Cheers
Ian
-
- Posts: 2040
- Joined: Thu Jul 12, 2007 5:42 pm
Re: WTB 1916 and 1816 Aluminiums
until you decide which alloys to buy, buy Easton Jazz in those sizes as they are very tough and quite cheap.
Kevin
Kevin
never complain....you did not have to wake up....every day is an extra bonus and costs nothing.