My New Sticks
Moderator: Moderators
- hillbilly WA
- Posts: 122
- Joined: Wed Jun 27, 2007 8:15 pm
- Location: Hills of Perth, WA
My New Sticks
Hey Guys
Just showing you the pictures of my new arrows
POC Shafts - 5/16 #40-45
125G Field Points
5" White Barred and White Solid Trueflight Shield Cut Feathers
Bohning(?) Plastic Indexed Nocks
Stain used was a 'walnut' satin
Thanks, Carl
My Quick Arrow Case i built two nights ago while watching the cricket
It's actually just the post box which had the arrow parts in it.
Thanks, Carl
Just showing you the pictures of my new arrows
POC Shafts - 5/16 #40-45
125G Field Points
5" White Barred and White Solid Trueflight Shield Cut Feathers
Bohning(?) Plastic Indexed Nocks
Stain used was a 'walnut' satin
Thanks, Carl
My Quick Arrow Case i built two nights ago while watching the cricket
It's actually just the post box which had the arrow parts in it.
Thanks, Carl
I did have a signature... It was a very good one in fact... It made me laugh... But i lost it... So i dont have one anymore.
Re: My New Sticks
Very nice mate, hope they shoot as good as they look! Nothin like a set of timbers in a quiver to set off a bow.
AK.
AK.
Re: My New Sticks
nicely done mate they look really good cheers
- Gringa Bows
- Posts: 6331
- Joined: Thu Aug 30, 2007 7:09 pm
- Location: Bundaberg QLD
Re: My New Sticks
good job mate, they're neat looking arrows.
Re: My New Sticks
Similar to mine mate, but they look a lot neater!
How did you do the cresting, on a jig?
Well done.
How did you do the cresting, on a jig?
Well done.
- hillbilly WA
- Posts: 122
- Joined: Wed Jun 27, 2007 8:15 pm
- Location: Hills of Perth, WA
Re: My New Sticks
Thanks for the comments guys, they aren't actually as neat as they look in the photos gundy, i made quite a few consistency mistakes , one when one of the lines became erased and i got down to the bottom part of it (the white part) and realised there was no line at the bottom, and that it didn't match up. And i was rushing it a bit because ive been doing it during my study breaks (Got my last exam today! Music, so i'll be going for a shoot with my mate Vaughn(Hills Twinky) tonight!).
And they were done in my cresting jig, a cordless drill and a tissue in the middle of a roll of tape holding the arrow, works pretty well
Thanks, Carl
And they were done in my cresting jig, a cordless drill and a tissue in the middle of a roll of tape holding the arrow, works pretty well
Thanks, Carl
I did have a signature... It was a very good one in fact... It made me laugh... But i lost it... So i dont have one anymore.
Re: My New Sticks
Very nice.
Where did you get the shafts and what draw weight is your bow?
Where did you get the shafts and what draw weight is your bow?
sssshhhh.... they are watching
Re: My New Sticks
They're crash hot mate, the only thing wrong with them is they have field points on the ends and not a solid 2 blade broadhead.
nice work
nice work
True Wild Range Traditional Bowhunter
Re: My New Sticks
They're crash hot mate, the only thing wrong with them is they have field points on the ends and not a solid 2 blade broadhead.
nice work
nice work
True Wild Range Traditional Bowhunter
- hillbilly WA
- Posts: 122
- Joined: Wed Jun 27, 2007 8:15 pm
- Location: Hills of Perth, WA
Re: My New Sticks
Hey Buzz i got the shafts from John at AMSO128 and my bow is #47.
And Adam, im getting my broadheads soon to finish off the set cant wait
Carl
And Adam, im getting my broadheads soon to finish off the set cant wait
Carl
I did have a signature... It was a very good one in fact... It made me laugh... But i lost it... So i dont have one anymore.
Re: My New Sticks
awsome little sticks i bed your big stick throws em far.
Im gonna make it bend and break-Fall Out Boy