bamboo flooring laminations
Moderator: Moderators
-
- Posts: 26
- Joined: Sun Sep 18, 2005 3:04 pm
bamboo flooring laminations
located bamboo flooring ...in nz..had a20mm sample sent .beautiful..has any one asked in oz for possibility of single lams 30mmflooring $330per 2.4x1.2m plus freight ...asked nz ...no reply....
- CameronPotter
- Posts: 598
- Joined: Wed Mar 02, 2005 2:01 pm
- Location: Seattle, USA
bamboo flooring
Edward,
I buy bamboo flooring boards direct from a Chinese importer here in Perth. I pay only $10-15 and they are 15mm thick, 1830mm x 93mm or 153mm wide. These boards are certainly much easier to manage than a full 2.4 x 1.8 sheet. I cut out strips using my bench saw 40mm wide, then split these on edge to get them to 6mm thick. After putting them through the planer using a tapering board, I have enough laminations to make up two-three bows.
Let us know if you can't find a supplier in NZ. I know Gilnockie has found a source in Tasmania. Whatever you do - make sure you get VERTICAL laminated boards, not HORIZONTAL/ while they look pretty, these will almost certainly fail.
http://www.acbambooworld.com/product.htm
I buy bamboo flooring boards direct from a Chinese importer here in Perth. I pay only $10-15 and they are 15mm thick, 1830mm x 93mm or 153mm wide. These boards are certainly much easier to manage than a full 2.4 x 1.8 sheet. I cut out strips using my bench saw 40mm wide, then split these on edge to get them to 6mm thick. After putting them through the planer using a tapering board, I have enough laminations to make up two-three bows.
Let us know if you can't find a supplier in NZ. I know Gilnockie has found a source in Tasmania. Whatever you do - make sure you get VERTICAL laminated boards, not HORIZONTAL/ while they look pretty, these will almost certainly fail.
http://www.acbambooworld.com/product.htm
- Attachments
-
- 2.gif (14.91 KiB) Viewed 1161 times
-
- Posts: 26
- Joined: Sun Sep 18, 2005 3:04 pm
bamboo laminations
im in nz..flooring is expensive......if more people asked individual lams may be sourced..for bows or rods etc