Made a couple more.
Moderator: Moderators
Made a couple more.
Made two more bows. The bottom is for a friend and came in at 42#@28". Has Western Woody Pear on the outside of the riser with Blackbutt and Jarrah. It has Western Red Cedar veneers. My best work so far and I'm very happy with it.
The one above it has Palm wood, Tuart and Jarrah in the riser and palm wood veneers, although the veneers split while being laminated and now has a funky look. Came in at 47#@28". It has a couple of air bubbles under the glass but I have since solved that issue when I made the Woody Pear bow above. This bow spits my arrows out beautifully and has become my favourite at 56#@31".
Got plans for two more in the near future. Sourcing some Banksia this Wednesday and can't wait to get that into a bow.
All my bows that I've made lined up.
The one above it has Palm wood, Tuart and Jarrah in the riser and palm wood veneers, although the veneers split while being laminated and now has a funky look. Came in at 47#@28". It has a couple of air bubbles under the glass but I have since solved that issue when I made the Woody Pear bow above. This bow spits my arrows out beautifully and has become my favourite at 56#@31".
Got plans for two more in the near future. Sourcing some Banksia this Wednesday and can't wait to get that into a bow.
All my bows that I've made lined up.
- Outbackdad
- Site Admin
- Posts: 478
- Joined: Tue Mar 31, 2009 11:46 pm
- Location: Dalby
Re: Made a couple more.
Great work.
- Gringa Bows
- Posts: 6331
- Joined: Thu Aug 30, 2007 7:09 pm
- Location: Bundaberg QLD
Re: Made a couple more.
Very nice mate,top work,i like those timbers in the risers especially the western woody pear
Re: Made a couple more.
good stuff! Looks like you have been busy!
nil illigitimo in desperandum carborundum
razorbows.com
razorbows.com
Re: Made a couple more.
You have been a busy boy, once the bug gets you it is hard to stop wanting to make more bows.
Although the bows are deflexed off the handle are you having any issues with what appears to be fairly short fadeouts?
Daryl.
Although the bows are deflexed off the handle are you having any issues with what appears to be fairly short fadeouts?
Daryl.
"And you must not stick for a groat or twelvepence more than another man would give, if it be a good bow.
For a good bow twice paid for, is better than an ill bow once broken. [Ascham]
“If a cluttered desk is a sign of a cluttered mind, of what, then, is an empty desk a sign?” [Einstein]
I am old enough to make my own decisions....Just not young enough to remember what I decided!....
For a good bow twice paid for, is better than an ill bow once broken. [Ascham]
“If a cluttered desk is a sign of a cluttered mind, of what, then, is an empty desk a sign?” [Einstein]
I am old enough to make my own decisions....Just not young enough to remember what I decided!....
Re: Made a couple more.
Hi Greybeard. Can't say I've had any issues caused by the fade outs. I didn't think they were that bad. What problems would you expect? The only problems I've had has been air pockets under the glass caused by improper fit of riser section as its difficult to shape in this design. The other problem I don't like is streaks in the clear glass, think this is out of my hands and have put it down to flaws in the glass.( please correct me if its something I'm doing). I do know that with ever bow I'm improving in my overall quality.
All my bows so far have only been of two laminations. Varying in size from 2mm out to 3mm with a 0.0025" taper which equates to 1.4mm over the 23" of limb from fade to tip for each lamination on the 62"bows. Will start making two more this weekend as I just collected some Banksia, Wandoo and Sheoak this arvo. Will attempt a bow with three laminations targeting a weight of 70lbs @31" and another around the 38lbs@31".
Cheers Muz
All my bows so far have only been of two laminations. Varying in size from 2mm out to 3mm with a 0.0025" taper which equates to 1.4mm over the 23" of limb from fade to tip for each lamination on the 62"bows. Will start making two more this weekend as I just collected some Banksia, Wandoo and Sheoak this arvo. Will attempt a bow with three laminations targeting a weight of 70lbs @31" and another around the 38lbs@31".
Cheers Muz
Re: Made a couple more.
Excellent work mate - it would be extra special taking game with a bow you've made yourself I reckon.
Re: Made a couple more.
I was wondering if at a 31" draw was there any hint of a hinge off the end of the fade.Muz1970 wrote:Can't say I've had any issues caused by the fade outs. I didn't think they were that bad. What problems would you expect?
Clear glass has nearly always had problems but not as apparent in the UL as opposed to the ULS.
Daryl.
"And you must not stick for a groat or twelvepence more than another man would give, if it be a good bow.
For a good bow twice paid for, is better than an ill bow once broken. [Ascham]
“If a cluttered desk is a sign of a cluttered mind, of what, then, is an empty desk a sign?” [Einstein]
I am old enough to make my own decisions....Just not young enough to remember what I decided!....
For a good bow twice paid for, is better than an ill bow once broken. [Ascham]
“If a cluttered desk is a sign of a cluttered mind, of what, then, is an empty desk a sign?” [Einstein]
I am old enough to make my own decisions....Just not young enough to remember what I decided!....
Re: Made a couple more.
No hinging as far as I'm aware. Will keep an eye on it in future. Thanks
I've only ever ordered UL glass for my bows. Will just have to live with it
I've only ever ordered UL glass for my bows. Will just have to live with it
Re: Made a couple more.
Nice work Muz, I really like the Western woody pear. Did you harvest that your self?
Rob.
Rob.
The shortest distance between two points is a FLATLINE
Email; robnicoll(at)bigpond(dot)com
www.flatlinebows.com.au
Email; robnicoll(at)bigpond(dot)com
www.flatlinebows.com.au
Re: Made a couple more.
Hey Rob, yes I did mate. Just glued up another last night. Have used Woody Pear with Banksia as Veneers and Banksia/Jarrah and Blackbutt in riser. Very excited with this one as the Banksia is very unique. Aiming for 70# give or take for my deer trips next year starting in April but will be my seroius goto hunting bow.
Will post a few picks later on. Cheers Muz
Will post a few picks later on. Cheers Muz
Re: Made a couple more.
Jeeze Muz! at 70# you'll be chasing your arrows further than the goats you shoot mate .
Look forward to seeing the pics.
Keep up the good work,
Rob.
Look forward to seeing the pics.
Keep up the good work,
Rob.
The shortest distance between two points is a FLATLINE
Email; robnicoll(at)bigpond(dot)com
www.flatlinebows.com.au
Email; robnicoll(at)bigpond(dot)com
www.flatlinebows.com.au