Almost done...Dial up beware
Moderator: Moderators
Almost done...Dial up beware
Here are some pics of the bow I have been working on for a few weeks now and the one that killed my cupboard in the shed.It was glued up by Glenn last year but was as it came off the form until the other day when I got around to starting the shaping process.I was wanting to make it into a takedown with a bowbolt but it shot too good to be messed with.I will put up some better pics when it is finished and I have dulled the glossy finish abit.
Cheers KIM
Cheers KIM
Re: Almost done...Dial up beware
outstanding work Kimall, I am constantly impressed with the quality of the bows being crafted by the members on this site!
Re: Almost done...Dial up beware
that is a beautiful piece of work Kimall
i hope it fires as good as it looks
Hue
i hope it fires as good as it looks
Hue
I can only be who I am
Re: Almost done...Dial up beware
Thanks guys for the comments.Hue it shoots better that it looks. Prob the best bow I have shot to date.
Cheers KIM
Cheers KIM
Re: Almost done...Dial up beware
Good Lord! You've outdone even yourself, Kim! Your right, that is a cracker! What sort of woods are we looking at? I'm coming up to see Davo in the next couple of weeks, if it suits you I'd love top drop around and see that beauty in the flesh!
Lately, if life were treating me any better, I'd be suspicious of it's motives!
Re: Almost done...Dial up beware
Flashy Kimal, very sweet. Hard to pick up in the riser photo - has that bow got parallel lamination's or is one reverse tapered mate
regards Jacko
regards Jacko
"To my deep morticication my father once said to me, 'You care for nothing but shooting, dogs and rat catching, and you will be a disgrace to yourself and all your family.' "
- Charles Darwin
- Charles Darwin
- Gringa Bows
- Posts: 6331
- Joined: Thu Aug 30, 2007 7:09 pm
- Location: Bundaberg QLD
Re: Almost done...Dial up beware
ahhhh its orite Kim. ................that clear glass in the tips looks good too,you did a top job mate.
Re: Almost done...Dial up beware
Come and shoot it if you like mate. Zebrawood and Winge riser.Zebrawood and ebony under clear glass on the limbs two tone not shown in the pics.Rock maple limb cores.
65 pound @ 28 680 grain darts 183 FPS Smooooooth and quiet.
65 pound @ 28 680 grain darts 183 FPS Smooooooth and quiet.
Re: Almost done...Dial up beware
Perry it will be flashy when it has a set of the laminated shafts in the bow quiver.It has one reverse taper in the core mate.
Rod thanks mate yes I love the look of the clear glass on the tips it makes the tips look like they are floating in the glass so to speak.These pics were just a couple of rushed ones I took I will put up some decent ones on the w/end.
Rod thanks mate yes I love the look of the clear glass on the tips it makes the tips look like they are floating in the glass so to speak.These pics were just a couple of rushed ones I took I will put up some decent ones on the w/end.
- Stickbow Hunter
- Supporter
- Posts: 11637
- Joined: Sat Jul 26, 2003 8:33 pm
- Location: Maryborough Queensland
Re: Almost done...Dial up beware
Some nice woods in that one Kim.
Jeff
Jeff
- Jayson Inglis
- Posts: 44
- Joined: Thu Jun 17, 2010 6:20 am
- Location: Tannum Sands, Queensland.
Re: Almost done...Dial up beware
Very nice colours indeed.
Re: Almost done...Dial up beware
Nice work Kimall,
Do those nobbly bits on the back of the riser really locate your fingers in a better position than a smoother shape. Looks like it might have the same effect as a massur sandal - you might just relax into the shot
I really like the clear glass under the nock overlays.
Steve
Do those nobbly bits on the back of the riser really locate your fingers in a better position than a smoother shape. Looks like it might have the same effect as a massur sandal - you might just relax into the shot
I really like the clear glass under the nock overlays.
Steve
http://www.stevenjawerth.weebly.com
On Christ the solid rock I stand, All other ground is sinking sand. Edward Mote, 1797-1874
On Christ the solid rock I stand, All other ground is sinking sand. Edward Mote, 1797-1874
-
- Posts: 121
- Joined: Fri Jan 26, 2007 1:00 am
- Location: Texas, USA
Re: Almost done...Dial up beware
That is a beautiful bow.
Blacktail TD Recurve: 66", 42# @ 30". Arrow: 32", 2212. PW: 75 Grains. AW: 421 Grains. SPD: 185 fps. GPP: 10.02
Blacktail TD Recurve: 66", 37# @ 30". Arrow: 32", 2212. PW: 75 Grains. AW: 421 Grains. SPD: 174 fps. GPP: 11.37
Blacktail TD Recurve: 66", 37# @ 30". Arrow: 32", 2212. PW: 75 Grains. AW: 421 Grains. SPD: 174 fps. GPP: 11.37
Re: Almost done...Dial up beware
I got one word for that bow, impressive. I like the look of that clear glass on the tips too...Roscoe
Re: Almost done...Dial up beware
Here is a couple of the limbs..
Thanks for all the comments.
I love the look of finger grooves on a bow and I decided this one was going to be everything I wanted in a bow so even though it does very little to the shooting of the bow ON THEY WENT.With this type of bow you dont hold the bow in the whole hand so to speak you hold it like a compound with just the thumb and 2 fingers so the rest of the grooves are just for show.
One side
The other side..
Cheers KIM
Thanks for all the comments.
I love the look of finger grooves on a bow and I decided this one was going to be everything I wanted in a bow so even though it does very little to the shooting of the bow ON THEY WENT.With this type of bow you dont hold the bow in the whole hand so to speak you hold it like a compound with just the thumb and 2 fingers so the rest of the grooves are just for show.
One side
The other side..
Cheers KIM
Re: Almost done...Dial up beware
Kim looks great and the finish looks good as well. Im glad you like to shoot it as you know with any bow its always a relief when it shoots well after you have spent so much time putting it all together,
Congradulations again.
Cheers Wayno
Congradulations again.
Cheers Wayno
Justastik Arrow Craft, Its all about the Wood.
Re: Almost done...Dial up beware
I was shooting it like this for 2 days even with the fiber glass shards in the had and the feather cuts from shooting off the hand it was fantastic so I was very confident it would be worth the effort.
- Guy Layton
- Posts: 609
- Joined: Mon Dec 29, 2008 7:39 am
- Location: N.S.W
Re: Almost done...Dial up beware
Wow...
That bow looks fantastic Kimall... and you think it needs more dolling up..! It looks great already...
I met a guy up at the Hunter Valley shoot this year who had one of Glenns defiants and I was itching to have a shot from it, I heard that are exceptional bows.... but our paths didn't cross again over the weekend.... I will be looking forward to catching up with him again next time...!
Cheers Guy..
That bow looks fantastic Kimall... and you think it needs more dolling up..! It looks great already...
I met a guy up at the Hunter Valley shoot this year who had one of Glenns defiants and I was itching to have a shot from it, I heard that are exceptional bows.... but our paths didn't cross again over the weekend.... I will be looking forward to catching up with him again next time...!
Cheers Guy..
The broadhead used, regardless of how sharp, is no where as important as being able to place it in the correct spot....!
Re: Almost done...Dial up beware
Very nice work!
- stickshooter
- Posts: 206
- Joined: Sun Feb 01, 2009 1:27 pm
- Location: New Zealand
- Contact:
Re: Almost done...Dial up beware
great looking bow well done
-
- Posts: 352
- Joined: Fri Aug 13, 2004 7:16 pm
- Location: Miriam Vale Queensland Australia
Re: Almost done...Dial up beware
Good one !
David
David